Hello forum users,
I am trying to better the form below.
https://skydrive.live.com/redir.aspx...53A10E5303!235
08 08 09 2011 Service Report Chateaugay
I would like to be able to make the following type changes without "Stopping protection" and restarting protection each time:
increase and decrease indents
bullets
numbering
when adding a new paragraph ... adding a check box to the next column field
Any advice or direction would be great.
Thanks
Ed
Sanitation Supv.
· Same as above.
· Safety: Leak on DSI acid drop corrected.
· CIP #5; Pan Line Wash: the graph looks good now that the valve is pulsed at a reduced duration.
Maintenance
· Issue with the inlet valve on Crystallizer #2: this valve has not been setup to wash with the CIP and from inspection today is not being hand cleaned regularly. Marty, can you have Jim B look at piping this into wash with the Silo and then programming will need to also be added to pulse the valve.
Had a meeting with Jim B, Ken, Marty, and Tom: this is already in progress.
Summary of Issues Discussed in Service Report & Goals of Assessment
SUGGESTED ACTIONS
SUGGESTED ACTIONS
BLANK
CUSTOMER
Crystallizer #2:
I inspected this last night and it had a milk stone haze in the bottom.
After the Caustic wash tank was Acid Washed and clean and we returned the CIP to its normal Caustic/Chlorine and Acid configuration; we washed Crystallizer #1 and it was clean, no haze or flakes. Jim re-washed Crystallizer #2 and the result was clean, shinny, no flakes. I again inspected it on Tuesday at 10 am after drying since 2 am, still shinny.
Tank are still left open for entire shifts.
SSOP follow-up needed.
Tanks/Silos should be closed as soon as possible after cleaning to reduce chance of contamination.